Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Lu, K.; Takamizawa, Hisashi; Katsuyama, Jinya; Li, Y.
International Journal of Pressure Vessels and Piping, 199, p.104706_1 - 104706_13, 2022/10
Times Cited Count：3 Percentile：58.29(Engineering, Multidisciplinary)Hirota, Takatoshi*; Nagoshi, Yasuto*; Hojo, Kiminobu*; Okada, Hiroshi*; Takahashi, Akiyuki*; Katsuyama, Jinya; Ueda, Takashi*; Ogawa, Takuya*; Yashirodai, Kenji*; Ohata, Mitsuru*; et al.
Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 9 Pages, 2021/07
Lu, K.; Katsuyama, Jinya; Li, Y.; Yoshimura, Shinobu*
Journal of Pressure Vessel Technology, 143(2), p.021505_1 - 021505_8, 2021/04
Times Cited Count：1 Percentile：10.06(Engineering, Mechanical)Nagase, Fumihisa; Fuketa, Toyoshi
NUREG/CP-0192, p.197 - 230, 2005/10
The Japanese regulatory criterion for a loss-of-coolant-accident (LOCA) is based on a threshold of fuel rod fracture during quenching, which was experimentally determined under simulated LOCA conditions. In order to evaluate the fracture threshold of high burn-up fuel rods, JAERI performs integral thermal shock tests simulating LOCA conditions. The tests have been performed with pre-hydrided, unirradiated claddings and high burn-up fuel claddings irradiated to 39 and 44 GWd/t at a PWR. It was shown that fracture/no-fracture threshold primarily depends on the oxidation amount and that the threshold decreases with increases in hydrogen concentration and axial restraint during the quench. It was also shown that fracture conditions of the tested high burn-up fuel claddings are consistent with the fracture threshold derived from unirradiated claddings with similar hydrogen concentrations.
Hanawa, Satoshi; Ishihara, Masahiro; Motohashi, Yoshinobu*
Zairyo, 54(2), p.201 - 206, 2005/02
no abstracts in English
Onizawa, Kunio; Suzuki, Masahide
JSME International Journal, Series A, 47(3), p.479 - 485, 2004/07
In the structural integrity assessment of reactor pressure vessel, fracture toughness values are estimated by assuming that the radiation effect on fracture toughness is equivalent to that on Charpy properties. Therefore, it is necessary to establish the correlation between both properties especially on irradiation embrittlement. In this paper, we present the fracture toughness data obtained by applying the master curve approach that was adopted recently in the ASTM test method. Materials used in this study are five ASTM A533B class 1 steels and one weld metal. Neutron irradiation for Charpy-size specimens as well as standard Charpy-v specimens was carried out at the Japan Materials Testing Reactor. The shifts of the reference temperature on fracture toughness due to neutron irradiation are evaluated. Correlation between the fracture toughness reference temperature and Charpy transition temperature is established. Based on the correlation, the optimum test temperature for fracture toughness testing and the method to determine a lower bound fracture toughness curve are discussed.
Onizawa, Kunio; Shibata, Katsuyuki; Kato, Daisuke*; Li, Y.*
JSME International Journal, Series A, 47(3), p.486 - 493, 2004/07
The probabilistic fracture mechanics (PFM) analysis code PASCAL has been developed in JAERI. This code can evaluate the conditional probabilities of crack initiation and fracture of a reactor pressure vessel (RPV) under transient conditions such as pressurized thermal shock (PTS). Based on the temperature and stress distributions in the vessel wall for four PTS sequences in a typical 3-loop PWR, parametric PFM analyses are performed using PASCAL on the variables such as pre-service inspection model, crack geometry, fracture toughness curve and irradiation embrittlement prediction equation. The results showed that the good perfomance inspection model had a significant effect on the fracture probability and reduced it by more than 3 orders of magnitude. The fracture probability calculated by the fracture toughness estimation method in Japan was about 2 orders of magnitude lower than that by the USA method. It was found that the treatment of a semi-elliptical crack in PASCAL reduced the conservatism in a conventional method that it is transformed into an infinite length crack.
Hanawa, Satoshi; Ishihara, Masahiro; Shibata, Taiju
Transactions of 17th International Conference on Structural Mechanics in Reactor Technology (SMiRT-17) (CD-ROM), 6 Pages, 2003/08
From a viewpoint of advanced design method of graphite components, it is important to apply the realistic fracture model in the design method. The applicability of the microstructure based brittle fracture model under multiaxial stress condition was, therefore, investigated. The fracture model is possible to treat grain size as well as pore size with fracture mechanics approach taking account of the crystal structure of the graphite. The model was applied to the biaxial strength prediction of near isotropic nuclear graphite using grain/pore related microstructural parameters. Prediction results were compared with biaxial strength data obtained by simultaneous loadings of inner pressure and longitudinal load with thin-walled cylindrical specimen. From this study, it was found that the fracture model predicted fairly good not only mean strength but also strength distribution under biaxial stress condition, and it was concluded that the microstructure based brittle fracture model would be applicable as the advanced design method.
Onizawa, Kunio; Shibata, Katsuyuki; Kato, Daisuke*; Li, Y.*
Proceedings of 11th International Conference on Nuclear Engineering (ICONE-11) (CD-ROM), 8 Pages, 2003/04
Probabilistic Fracture Mechanics (PFM) has been used in the fields of reliability analysis for important structural components. At JAERI, the PFM analysis code PASCAL has been developed. This code evaluates the conditional probabilities of crack initiation and fracture of a reactor pressure vessel (RPV) under transient conditions such as pressurized thermal shock (PTS). Four cases of PTS transients were selected based on the severity for a typical 3-loop PWR. Based on thermal stress analyses, PFM analyses were performed by using PASCAL code focusing on some important variables on the RPV fracture probability. The results showed that non-destructive examination methods had a significant effect on the fracture probability by more than three orders of magnitude. The comparisons of the results using fracture toughness estimation methods between in Japan and USA, and crack geometries between a semi-elliptical surface crack and an infinite surface crack are also made.
Ishihara, Masahiro; Takahashi, Tsuneo*
Zairyo, 51(4), p.425 - 430, 2002/04
no abstracts in English
Ishihara, Masahiro; Takahashi, Tsuneo*; Hanawa, Satoshi
Transactions of 16th International Conference on Structural Mechanics in Reactor Technology (SMiRT-16) (CD-ROM), 8 Pages, 2001/08
no abstracts in English
Onizawa, Kunio; Suzuki, Masahide
Proceedings of Asian Pacific Conference on Fracture and Strength '01(APCFS '01) and International Conference on Advanced Technology in Experimental Mechanics '01 (ATEM '01), p.140 - 145, 2001/00
In the structural integrity assessment of reactor pressure vessel, fracture toughness values are estimated by assuming that the radiation effect on fracture toughness is equivalent to that on Charpy properties. Therefore, it is necessary to establish the correlation between both properties especially on irradiation embrittlement. In this paper, we present the fracture toughness data obtained by applying the master curve approach that was adopted recently in the ASTM test method. Materials used in this study are five ASTM A533B class 1 steels and one weld metal. Neutron irradiation for Charpy-size specimens as well as standard Charpy-v specimens was carried out at the Japan Materials Testing Reactor. The shifts of the reference temperature on fracture toughness due to neutron irradiation are evaluated. Correlation between the fracture toughness reference temperature and Charpy transition temperature is established. Based on the correlation, the optimum test temperature for fracture toughness testing and the method to determine a lower bound fracture toughness curve are discussed.
Onizawa, Kunio; Suzuki, Masahide
Proceedings of the 8th Japanese-German Joint Seminar on Structural Integrity and NDE in Power Engineering, p.62 - 69, 2001/00
To assure the structural integrity of reactor pressure vessel (RPV) throughout its operational life, fracture toughness of the steel after neutron irradiation must be determined. In this report the investigation on the master curve approach using Charpy-size specimens is presented for the precise evaluation of fracture toughness on irradiation embrittlement. Using some Japanese A533B-1 steels, fracture toughness tests in the transition range were performed varying specimen thickness. Charpy-size specimens were also irradiated at Japan Materials Testing Reactor. Applying the master curve method and JEAC method as well, the specimen size effect, temperature dependence and the lower bound were evaluated. The shifts of reference temperature of fracture toughness and Charpy transition temperature due to neutron irradiation were also compared and found to be almost equivalent.
Suzuki, Satoshi; Ezato, Koichiro; Sato, Kazuyoshi; Nakamura, Kazuyuki; Akiba, Masato
Fusion Engineering and Design, 49-50, p.343 - 348, 2000/11
Times Cited Count：5 Percentile：37.61(Nuclear Science & Technology)no abstracts in English
C and its electrochemical evaluationNishiyama, Yutaka; Fukaya, Kiyoshi; Suzuki, Masahide; Eto, Motokuni
Journal of Nuclear Materials, 258-263, p.1187 - 1192, 1998/00
Times Cited Count：4 Percentile：38.63(Materials Science, Multidisciplinary)no abstracts in English
Ishihara, Masahiro; Futakawa, Masatoshi
JAERI-Data/Code 97-054, 67 Pages, 1997/12
JAERI-Data-Code-97-054.pdf:1.23MB
no abstracts in English
Onizawa, Kunio; Suzuki, Masahide
ISIJ International, 37(8), p.821 - 828, 1997/08
Times Cited Count：3 Percentile：35.47(Metallurgy & Metallurgical Engineering)no abstracts in English
Nishiyama, Yutaka; Fukaya, Kiyoshi; Suzuki, Masahide; Kodaira, Tsuneo; Oku, Tatsuo*
Effects of Radiation on Materials; 15th International Symposium (ASTM STP 1125), p.1287 - 1303, 1992/00
no abstracts in English
*;
JAERI-M 83-086, 103 Pages, 1983/06
no abstracts in English
JAERI-M 7267, 36 Pages, 1977/09
no abstracts in English
